- Based on clip together moulded plastic housings all of which are 600 mm long.
- Each housing contains transparent compartments which tilt forward giving rapid and easy access to the contents.
- All compartments produced from clear shatter-resistant plastic for long service life.
- Each tilting compartment has an integral label holder to aid component identification.
- Can be used individually, clipped together in blocks, screwed to a wall or held in our free-standing rack module.
- 5 tilting compartment sizes offer highly visible, dense and dust protective storage for a wide selection of components.
Free-standing Rack Module
- Steel frame construction, powder coated in light grey RAL 7035
- The standard Rack Module is offered empty for the user to add the required combination of tilt box units. Note the usable height of the Rack is 1650 mm and the overall height of the tilt boxes selected should not exceed this dimension.
- A fully kitted unit is offered – see illustration – using a popular combination of tilt
box units as listed in the table.
- Any number of the Rack Modules may be positioned together to form longer runs both single sided and back-to-back for double sided units. These make ideal work area separators in an open plan
environment.
- For safety single sided individual racks or runs should be securely fixed to a
wall or other suitable vertical surface. When used back-to-back the units should be bolted together
and also fixed to the floor.
Instant visual identification and ease of retrieval – simple but effective storage.
Single Rack Module – kitted
Illustration of a double sided unit using 4 Rack Modules bolted together to
provide a stable island unit of very dense storage for small and micro parts.
|
Free-standing Rack Module |
|