Unit illustrated – one starter bay and two add-on bays MULTISTRONG® M
MULTISTRONG® M
Uprights –
- Hot rolled steel section to IPE 140 standard. Slotted both sides to enable quick conversion from single to double sided just by changing the upright foot.
- Cantilever arm load capacity up to 535 kg udl. Upright stands will accept up to
5760 kg if free-standing.
- Foot load capacity up to 5 times the individual cantilever arm safe load. Therefore, if
loading arms to the maximum, do not exceed 5 levels of arm storage per upright.
- Cantilever arms can be clipped into uprights at 50 mm vertical centres. Arm section 70 x 30 mm.
- Each bay – starter or add-on type – is fully braced for easy assembly and stability.
- Finished in RAL 5010 Enzian blue.
META MULTISTRONG® L
Size range
Standard – Upright stands
2000 mm
2200 mm
2500 mm
Standard – Bay widths
1030 mm
1330 mm
Standard – Cantilever arm lengths
400 mm
500 mm
600 mm
Layout information
Starter bay width –
bay width + 64 mm (add-on bay is bay width only)
Depth – Single sided rack
Arm length + 210 mm
Depth – Double sided rack
2 x Arm length + 220 mm
Higher loadings produced by complex lightweight section.
End stop/ divider pegs can be placed in the arms at 100 mm centres. The pegs cannot be accidentally dislodged from the underside when loads are placed or retrieved from the storage level located beneath.